techninė informacija:
Air Inlet port(s) size: M22x1.5
Air Delivery port(s) size:
23,25: M16x1.5, 24: M22x1.5
Purge control: Timed Purge
Safety valve pressure [bar]: 13 +4
Unloader cut-out pressure [bar]: 11.0 ±0.2
Unloader cut-in pressure [bar]: 10.2
Unloader pressure control range [bar]: 0.8+0.7
With internal Silencer: No
Exhaust Connector: Ø 16,0 mm Push Connector
Exhaust Silencer fitted: No
Heater Connector Type: Bayonet ISO 15170 A1 - 2.1.14
Heater Voltage [volts]: 24
Cartridge type: Conventional
Cartridge connection type: M39x1,5 right hand thread

techninė informacija:
Air Inlet port(s) size: M22×1,5
Air Delivery port(s) size: M22×1,5
Purge control: Reservoir; Port: M22x1,5
Safety valve pressure [bar]: 13.4
Unloader cut-out pressure [bar]: 11,5+/-0,3
With internal Silencer: No
Exhaust Connector: Snap-on Connector
Exhaust Silencer fitted: Yes
Heater Connector Type: Mounted in EAC
Heater Voltage [volts]: 24
Cartridge type: OSC
Cartridge connection type: M39x1,5 left hand thread

techninė informacija:
Air Dryer Type: Stand-Alone
Body Mounting:
Ø .425 Hole with 3/8-24 UNF-2A Bolted Joint (8x)
Lower Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Lower Mounting Bracket Angle (CCW from SUP): 90°
Upper Mounting Type: Strap (Carbon Steel)
Upper Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Upper Mounting Bracket Angle (CCW from SUP): 90°
Upper Mounting Bracket Height (from Lower Mounting Bracket):
6.50 IN
Supply Port: 1/2-14 NPT
Control Port: 1/4-18 NPT
Delivery Port 1: 1/2-14 NPT
Purge Exhaust Port: Open
Purge Valve Type: Hard Seat
Purge Volume: Standard
Safety Valve Opening Pressure: 200 PSI
Heater / Thermostat Rating: 24V / 75W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: PuraGuard (Coalescing)
Cartridge Thread: 5/8-11 UNC-2A
Cartridge Stabilizer Ring Included: No
Clearance to Remove Cartridge: 11.00 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.

techninė informacija:
Air Dryer Type: Stand-Alone
Body Mounting: 1/2-13 UNC-2B (3x) - Both Sides
Clamp Band Angle (CW from SUP): 335°
Supply Port: 1/2-14 NPT
Control Port: 1/4-18 NPT
Delivery Port 1: 1/2-14 NPT
Delivery Port 2: 1/2-14 NPT
Purge Exhaust Port: Standard
Extended Purge Port: 1/4-18 NPT (Plugged)
Purge Valve Type: Hard Seat
Purge Volume: Standard
Safety Valve Opening Pressure: 200 PSI
Heater / Thermostat Rating: 12V / 75W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: PuraGuard (Coalescing)
Cartridge Thread: M39 x 1.5-6H RH
Cartridge Stabilizer Ring Included: No
Clearance to Remove Cartridge: 1.00 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.