techninė informacija:
Air Dryer Type: Stand-Alone
Body Mounting: 3/8-16 UNC-2B (4x)
Lower Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Lower Mounting Bracket Angle (CCW from SUP): 270°
Upper Mounting Type: Cable
Upper Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Upper Mounting Bracket Angle (CCW from SUP): 270°
Upper Mounting Bracket Height (from Lower Mounting Bracket):
3.33 IN
Supply Port: 1/2-14 NPT
Control Port: 1/4-18 NPT
Delivery Port 1: 1/2-14 NPT
Purge Exhaust Port: Standard
Extended Purge Port: 1/8-27 NPT (Plugged)
Purge Valve Type: Hard Seat
Purge Volume: Standard
Safety Valve Opening Pressure: 200 PSI
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: 1 1/4-7 UNC-2B
Clearance to Remove Cartridge: .50 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)

techninė informacija:
Mounting: Ø.675 IN (2x) / .675 IN X 1.069 IN (2x)
Air Dryer Configuration: AD-IP / AD-IP (EverFlow)
Supply Port: 1/2-14 NPT x 1/2-14 NPT (90° Elbow)
Governor Control Port: 1/8-27 NPT
PRI Delivery (Reservoir) Port:
1/2-14 NPT x 1/2-14 NPT (Male Branch Tee)
Purge Exhaust Port: Standard
Purge Volume: Standard
Purge Valve Type: Soft Seat
Safety Valve Opening Pressure: 200 PSI
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Heater / Thermostat Rating: 12V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: Standard
Cartridge Thread: 1 1/4-7 UNC-2B
Clearance to Remove Cartridge: .30 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.

techninė informacija:
Air Dryer Type: Stand-Alone
Mounting: Purge Reservoir - 3/8-16 UNC-2B (4x)
Supply Port: 1/2-14 NPT
Governor Unloader Port:
1/8-27 NPT x 1/4 Tube (Compression / 90° Elbow)
Governor Reservoir Port: 1/8-27 NPT (Plugged)
PRI Delivery Port 21: 1/4-18 NPT
PRI Delivery Opening Pressure: 106 PSI
SEC Delivery Port 22: 1/4-18 NPT
SEC Delivery Opening Pressure: 106 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 106 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 106 PSI
Purge Exhaust Port: Standard
Purge Volume: Extended
Purge Valve Type: Hard Seat
Safety Valve Opening Pressure: 153 PSI
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Adjustable
Cut-in Pressure: 110 PSI
Cut-out Pressure: 130 PSI
Pressure Protection Valve Configuration: 4 in Parallel
Reservoir Diameter: Ø 9.0 IN
Reservoir Length: 6.00 IN
Reservoir Material: Steel
Number of Compartments: 1
Reservoir Fill Type: External Fill
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.

techninė informacija:
Mounting: Ø.675 IN (2x) / .675 IN X 1.069 IN (2x)
Air Dryer Configuration: AD-IP / AD-IP (EverFlow)
Supply Port: 1/2-14 NPT x 1/2-14 NPT (90° Elbow)
Governor Control Port: 1/8-27 NPT
PRI Delivery (Reservoir) Port:
1/2-14 NPT x 1/2-14 NPT (Male Branch Tee)
Purge Exhaust Port: Standard
Purge Volume: Standard
Purge Valve Type: Soft Seat
Safety Valve Opening Pressure: 200 PSI
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: 1 1/4-7 UNC-2B
Clearance to Remove Cartridge: .30 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.

techninė informacija:
Mounting: Ø.675 IN (2x) / .675 IN X 1.069 IN (2x)
Air Dryer Configuration: AD-9 / AD-9 (EverFlow)
Supply Port: 1/2-14 NPT x 1/2-14 NPT (90° Elbow)
Governor Control Port: 1/8-27 NPT
PRI Delivery (Reservoir) Port:
1/2-14 NPT x 1/2-14 NPT (Male Branch Tee)
Purge Exhaust Port: Standard
Purge Volume: Standard
Purge Valve Type: Soft Seat
Safety Valve Opening Pressure: 200 PSI
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Heater / Thermostat Rating: 24V / 75W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: 5/8-11 UNC-2A
Clearance to Remove Cartridge: 11.00 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.

techninė informacija:
Mounting: .676 IN x .40 IN (4x)
Air Dryer Configuration: AD-IS / AD-IS (EverFlow)
Supply Port: 1/2-14 NPT X 1/2-14 NPT (Street Tee)
Governor Unloader Port: 3/8-18 NPT x 1/2 PTC (45° Elbow)
Governor Reservoir Port (Remote Charge):
1/8-27 NPT x 1/4 Tube (Compression / 90° Elbow)
Governor Control Port:
1/8-27 NPT X 1/4 Tube (Compression / Straight)
SEC Reservoir Port:
1/8-27 NPT X 1/4-18 NPT (90° Elbow / Extended)
PRI Delivery (Reservoir) Port: 1/4-18 NPT
PRI Delivery Opening Pressure: 103 PSI
SEC Delivery (Reservoir) Port: 1/4-18 NPT
SEC Delivery Opening Pressure: 109 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 109 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 109 PSI
Purge Exhaust Port: Standard
Purge Volume: Standard
Purge Valve Type: Soft Seat
Safety Valve Opening Pressure: 153 PSI
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Non-Adjustable
Cut-in Pressure: 105 PSI
Cut-out Pressure: 130 PSI
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.